piping question
#1
Thread Starter
Join Date: May 2006
Location: Salt Lake City, UT
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
piping question
i need a 1.5 or 2" in dia piping u ben and i need the measure ment from the center of each leg to be 4.5 inches apart but i look around and most places measure it using bend radius? how can i tell which is the one i need? sorry for noob question but i don't know where else to turn
any help is appreciated guys thanks
any help is appreciated guys thanks
#2
Honda-Tech Member
Join Date: Oct 2004
Location: Pacoima, CA
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Re: piping question (JuggerNuts)
th bend radius is exactly what you are talking about, so if you see lets say 3" radius u bend, that means its 3" from the center of the u bend to the center of ether leg... the whole u bend would be 6" from center to center of each leg.
So you need something with a 2.25" radius which on a 2" is going to be almost impossible.. but you may find one for a 1.5" pipe.
So you need something with a 2.25" radius which on a 2" is going to be almost impossible.. but you may find one for a 1.5" pipe.
Thread
Thread Starter
Forum
Replies
Last Post
Broertje
Honda Civic / Del Sol (1992 - 2000)
7
03-02-2012 07:48 AM