TurbodCX

Here is some pics to show you guys what we are currently working on in the shop, this is our new prototype H22 manifold that allows you to keep the factory front Engine mount. Still requires that you use a 92-95 civic radiator. The flange is on the for mocking purposes, the actual flange is being water jetted as i type.

Enjoy









Brian

legendboy

This One

Pretty cool

B18C1CYA

wow that looks cool man , nice collector you have there

TurbodCX

Hahahah LOL yeah i am not real sure as to where it came from. that guys sure does nice work though.

B18C1CYA

well thanks man ,

Turbo-charged

looks good....i do a lot of H22 stuff, i need to make a new manifold for my h22 hatch and i can't figure out how im going to do it yet. if the stupid alt. wasnt there it would be easy...i may just have to relocate that? what size tube is that between the collector and the turbo flange? i should probably just get a smaller turbo..that would make my life easier. T72 with "S" cover takes up too much damn space.

Turbo-charged

is this going to be a production manifold or a one-off? if its a production manifold i have a few questions.......

2point2

wow! looks good, looks like you have some work to do around the T3 inlet flange? - hope it's getting braced though??

also, love to donut!!! where'd you pick that up?

Turbo-charged

judging by the v-band housing i'd assume thats a T4 flange. my collector i got form B18C1cya fit my T3 flange perfectly....so i was kind of currious if it was going to be a little small for the T4 flange. havnt had a chance to ask him yet. if i remember correctly they said that is just a mock up flange for this application. are you guys going to smooth the collector so that it mates up flush to the tube between the collector and the flange? hey it could almost be a front mounted turbocharger! keep posting the progress! fabrication rules. i dont think i could ever "buy" a turbo kit...what fun is that!

B18C1CYA

the collector will fit t4 if you trim it back , i make them that way so you can fit it to your needs , and they said they are cutting a new inlet flange for the turbo , so yeah that is just for mock up ,

0project dc2

iTrader: (1)

heheh i almost made a manifold 90% that looked like that. howver on a B series i didnt think they're be tha tmuch room to play around like that.

m.

Lookin damn good.

kb58

Okay, I'll be the negative nancy... there looks like there's a lot of gaps around the collector.... sorry.

Eddiebx

yeah and your missing a runner too,

stackz

and you smell bad also.

AR Fab

We have Waterjetted flanges that are bored with a round hole......as far as the collector having gaps.....its flat now...I was mocking up the manifold at the time of pics....its now fully welded and machined....

As far as production...Ill make one for anyone who askes...I doubt I will keep them on the shelf. The ScionTC Manifolds adn our new B-Series manifolds will be production....


Howard

AR Fab

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2point2 &raquo;</TD></TR><TR><TD CLASS="quote">wow! looks good, looks like you have some work to do around the T3 inlet flange? - hope it's getting braced though??

also, love to donut!!! where'd you pick that up?</TD></TR></TABLE>


We have them manufacted for us now.....so I can keep the cost down....but a 3" Donut is expensive!!!!!!

HydroForming is cool......


Howard

triple_s1x

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AR Fab &raquo;</TD></TR><TR><TD CLASS="quote">


We have them manufacted for us now.....so I can keep the cost down....but a 3" Donut is expensive!!!!!!

HydroForming is cool......


Howard</TD></TR></TABLE>

How expensive are we talking, i've been looking around them.

chet

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AR Fab &raquo;</TD></TR><TR><TD CLASS="quote">


We have them manufacted for us now.....so I can keep the cost down....but a 3" Donut is expensive!!!!!!

HydroForming is cool......


Howard</TD></TR></TABLE>

to howard at ARFAB.

AR Fab

thanks chet....


My new Scion is here now....time to tear it apart!

It dyno'd in at 137whp and 132ft tq!!!!! B16 killa...to bad its in a tank! 2900#'s!

Howard

chet

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AR Fab &raquo;</TD></TR><TR><TD CLASS="quote">thanks chet....


My new Scion is here now....time to tear it apart!

It dyno'd in at 137whp and 132ft tq!!!!! B16 killa...to bad its in a tank! 2900#'s!

Howard</TD></TR></TABLE>

what are your plans for the scion...brad hasn't filled me in?

AR Fab

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chet &raquo;</TD></TR><TR><TD CLASS="quote">

what are your plans for the scion...brad hasn't filled me in?</TD></TR></TABLE>


Turbo! Nitrous!.....KABOOM!.....j/k

WE are building alot of parts for it and its gonna be our shop show car...
I wanted something new....


Howard

chet

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AR Fab &raquo;</TD></TR><TR><TD CLASS="quote">


Turbo! Nitrous!.....KABOOM!.....j/k

WE are building alot of parts for it and its gonna be our shop show car...
I wanted something new....


Howard</TD></TR></TABLE>

haha

given the fact that the scion can be fitted with a supercharger from the factory and toyota's reputation for building tough motors i was wondering how the stock bottom end looked...and how you think the block will hold up with and without sleeves?

i like the way those things look...but i don't like how much they weigh.

its gonna take 600hp to run 10's in that thing.

1FSTHATCH

Looks good guys, can't wait to see this!!!

Pickle