General price of DIY mani
#2
Re: General price of DIY mani (sleepin91teg)
if it's stainless roughly 140$ maybe a lil less if you shop around on the flanges.
i know mild steel is alot less but i never actually priced it out
i know mild steel is alot less but i never actually priced it out
#3
Junior Member
Thread Starter
Join Date: Dec 2003
Location: I had 1000 posts, Ohio, 45805
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (fknslmd)
ok cool, anyone else out there know maybe some places where to buy flanges, i looked at exploited racing
#4
Honda-Tech Member
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (sleepin91teg)
#6
Honda-Tech Member
Join Date: Mar 2003
Location: columbus, ohio, usa
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (sleepin91teg)
i built a stainless log manifold (f22b2) for abotu 110.00
i got flanges from weir racing on homemadeturbo.com
i got flanges from weir racing on homemadeturbo.com
Trending Topics
#8
Honda-Tech Member
Join Date: Jul 2002
Location: IN A VAN DOWN BY THE RIVER
Posts: 2,673
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (sleepin91teg)
what about ram horn style? how many bends do I neeed? thanks guys I just cant afford to order to many. and also what bends?
#9
Honda-Tech Member
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (bottle fed)
This is not my mani ( I forgot whose it is.......Shitbird I think) but from what i could see it was (14) 90 degree and (2) 45's.
#11
Honda-Tech Member
Join Date: Jun 2002
Location: Brooklyn, NY
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
#12
Re: General price of DIY mani (clean90Si)
i bought 3 90s 2 tees from a plumbing store the 90s were 9 bucks the tees were like 14 so 55 bucks for that
then i made all my own flanges and welded it myself
so i pretty much made mine for 55 dollars since i work at a shop and the steel and weld rod was free
http://www.torontocivics.com/t...71253
theres a pic of my mani
then i made all my own flanges and welded it myself
so i pretty much made mine for 55 dollars since i work at a shop and the steel and weld rod was free
http://www.torontocivics.com/t...71253
theres a pic of my mani
#13
Re: General price of DIY mani (clean90Si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean90Si »</TD></TR><TR><TD CLASS="quote">This is not my mani ( I forgot whose it is.......Shitbird I think) but from what i could see it was (14) 90 degree and (2) 45's.
</TD></TR></TABLE>
dude, that's my mani!
</TD></TR></TABLE>
dude, that's my mani!
#14
Honda-Tech Member
Join Date: Sep 2004
Location: McAllen, Tx, usa
Posts: 2,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (speedemon)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by speedemon »</TD></TR><TR><TD CLASS="quote">i bought 3 90s 2 tees from a plumbing store the 90s were 9 bucks the tees were like 14 so 55 bucks for that
then i made all my own flanges and welded it myself
so i pretty much made mine for 55 dollars since i work at a shop and the steel and weld rod was free
http://www.torontocivics.com/t...71253
theres a pic of my mani
</TD></TR></TABLE>
where exactly did you get the tees and 90s? are they stainless?
then i made all my own flanges and welded it myself
so i pretty much made mine for 55 dollars since i work at a shop and the steel and weld rod was free
http://www.torontocivics.com/t...71253
theres a pic of my mani
</TD></TR></TABLE>
where exactly did you get the tees and 90s? are they stainless?
#15
Honda-Tech Member
Join Date: Mar 2004
Location: Easthampton, MA, US
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (sleepin91teg)
i just ordered all my parts for my log manifold and it came too just over $100. 60 for piping( the "t's" cost the most), 22 for head flange, and 25 for compressor flange.
#16
Re: General price of DIY mani (92CHB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92CHB »</TD></TR><TR><TD CLASS="quote">i just ordered all my parts for my log manifold and it came too just over $100. 60 for piping( the "t's" cost the most), 22 for head flange, and 25 for compressor flange.</TD></TR></TABLE>
For that much I think you should have make a ramhorn style mani, 14 Ls come up to be 69$, that's only 9$ more of what you paid for the piping.
For that much I think you should have make a ramhorn style mani, 14 Ls come up to be 69$, that's only 9$ more of what you paid for the piping.
#17
Honda-Tech Member
Join Date: Sep 2004
Location: McAllen, Tx, usa
Posts: 2,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (LostCRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LostCRX »</TD></TR><TR><TD CLASS="quote">
For that much I think you should have make a ramhorn style mani, 14 Ls come up to be 69$, that's only 9$ more of what you paid for the piping.</TD></TR></TABLE>
where do you get your Ls?
For that much I think you should have make a ramhorn style mani, 14 Ls come up to be 69$, that's only 9$ more of what you paid for the piping.</TD></TR></TABLE>
where do you get your Ls?
#19
Re: General price of DIY mani (h22a193)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22a193 »</TD></TR><TR><TD CLASS="quote">^ where did you get your L bends from </TD></TR></TABLE>
Mcmaster-Carr is the zone to order from.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22a193 »</TD></TR><TR><TD CLASS="quote"> and you only used 2 45's? </TD></TR></TABLE>
yes only 2 for scam horn style and you mean cut one 90* in half
Mcmaster-Carr is the zone to order from.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22a193 »</TD></TR><TR><TD CLASS="quote"> and you only used 2 45's? </TD></TR></TABLE>
yes only 2 for scam horn style and you mean cut one 90* in half
#20
Honda-Tech Member
Join Date: Sep 2004
Location: McAllen, Tx, usa
Posts: 2,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: General price of DIY mani (LostCRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LostCRX »</TD></TR><TR><TD CLASS="quote">
For that much I think you should have make a ramhorn style mani, 14 Ls come up to be 69$, that's only 9$ more of what you paid for the piping.</TD></TR></TABLE>
where do you get your Ls?
For that much I think you should have make a ramhorn style mani, 14 Ls come up to be 69$, that's only 9$ more of what you paid for the piping.</TD></TR></TABLE>
where do you get your Ls?
#21
Re: General price of DIY mani (alexsracing)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by alexsracing »</TD></TR><TR><TD CLASS="quote">
where do you get your Ls?</TD></TR></TABLE>
please refer to the post right above yours
where do you get your Ls?</TD></TR></TABLE>
please refer to the post right above yours
#22
Re: General price of DIY mani (LostCRX)
update - Looks like user mbpwrx can beat Mcmaster Carr prices on weld Els. I'm gonna give him a try soon and see what he can do for me.
#23
Re: General price of DIY mani (Bailhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bailhatch »</TD></TR><TR><TD CLASS="quote">update - Looks like user mbpwrx can beat Mcmaster Carr prices on weld Els. I'm gonna give him a try soon and see what he can do for me.</TD></TR></TABLE>
Thanks for the recommendation Bail.
Please feel free to contact me via IM or phone, and I promise we can beat McMaster's prices on all types of stainless (elbows, straight lengths, fittings, fasteners, etc.)
Just for referrence sake, we sell to John Force Racing (brake & fuel lines, tubing, and hardware), TRD, and Saleen. Just to name a few.
Richard @ Ace Stainless Supply
800-888-8769
Since 1981
Thanks for the recommendation Bail.
Please feel free to contact me via IM or phone, and I promise we can beat McMaster's prices on all types of stainless (elbows, straight lengths, fittings, fasteners, etc.)
Just for referrence sake, we sell to John Force Racing (brake & fuel lines, tubing, and hardware), TRD, and Saleen. Just to name a few.
Richard @ Ace Stainless Supply
800-888-8769
Since 1981
Thread
Thread Starter
Forum
Replies
Last Post