WTB : Sleeved 85mm B18 block
10-19-2011, 07:19 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: Mumbai, Maharashtra, India
Posts: 348
Likes: 0
Received 1 Like
on
1 Post
WTB : Sleeved 85mm B18 block
Hi,
Looking for a good condition 85mm sleeved B series block. Have 85mm CP pistons which need to fit. Dont need the pistons or rods just the block with crank, girdle etc.
PM me .
Jignesh
Looking for a good condition 85mm sleeved B series block. Have 85mm CP pistons which need to fit. Dont need the pistons or rods just the block with crank, girdle etc.
PM me .
Jignesh
10-20-2011, 04:38 PM
#3
Honda-Tech Member
iTrader: (3)
Join Date: Feb 2002
Location: MN
Posts: 12,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: WTB : Sleeved 85mm B18 block
i have a rs machined Sleeved LS block with crank and mains.
No issues with block. it made 220whp with stock gsr head and skunk2 stage 1 cams 13.7cr weisco pistons
It currently have no pistons but I also have Import Builders spec light weight all motor rods.
You can buy it with or with out crank/rods.
Currently at 84mm but I can have it bored out at local machine shop to 85mm for $100
I'm looking to get $600 + shipping ($50ish) for the sleeved LS block no rods or crank.
see vouch thread i only sell good stuff
i take paypal
item such as this will required signature at delivery and address
will be shipping fedex ground with tracking and insurance up to 1,000.00
LMK - charlie Moua
No issues with block. it made 220whp with stock gsr head and skunk2 stage 1 cams 13.7cr weisco pistons
It currently have no pistons but I also have Import Builders spec light weight all motor rods.
You can buy it with or with out crank/rods.
Currently at 84mm but I can have it bored out at local machine shop to 85mm for $100
I'm looking to get $600 + shipping ($50ish) for the sleeved LS block no rods or crank.
see vouch thread i only sell good stuff
i take paypal
item such as this will required signature at delivery and address
will be shipping fedex ground with tracking and insurance up to 1,000.00
LMK - charlie Moua
10-20-2011, 10:05 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: Mumbai, Maharashtra, India
Posts: 348
Likes: 0
Received 1 Like
on
1 Post
Re: WTB : Sleeved 85mm B18 block
Guys,
Am fully aware that shipping will be expensive no worries. Would request shipping quotes from Fedex/UPS etc.
Jignesh
Am fully aware that shipping will be expensive no worries. Would request shipping quotes from Fedex/UPS etc.
Jignesh
Trending Topics
10-21-2011, 07:54 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: Mumbai, Maharashtra, India
Posts: 348
Likes: 0
Received 1 Like
on
1 Post
Re: WTB : Sleeved 85mm B18 block
Hi Guys,
Just for reference I had a shipping quote via UPS from King Motorsports for a fully assembled head for US330/- and another from Portflow via Fedex for the same for about US500/-(also included a used crank).
Am OK with that amount.
Jignesh
Just for reference I had a shipping quote via UPS from King Motorsports for a fully assembled head for US330/- and another from Portflow via Fedex for the same for about US500/-(also included a used crank).
Am OK with that amount.
Jignesh
11-25-2011, 06:12 PM
#13
Honda-Tech Member
Join Date: Jul 2004
Location: Beautiful Cali
Posts: 5,580
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
topsekret
All Motor / Naturally Aspirated
4
08-05-2003 08:33 PM
