WTB EK Swap Parts NY Area
#1
Honda-Tech Member
Thread Starter
WTB EK Swap Parts NY Area
I need the following parts.
-99-00 civic si driver side engine bracket that comes off the block to go to the mount (they are 40 dollars new so keep that in mind if you have one to offer)
-b series 8-12.5lb aftermarket flywheel (must be in good condition, I prefer clutch masters, competition clutch, or act)
-aftermarket intake manifold for b16 head (I prefer jg/edelbrock performer x, victor x, or skunk2 pro series, possibly a ITR)
-68mm throttle body
-rc or precision 310cc injectors
-drive shaft shop 2.9 axles
-b series shift linkage
-92-00 half size civic radiator (nothing stock, either fluidyne, mishimoto, something like that)
-b18c lower timing covers inner and outer
-gsr/itr timing gear for crankshaft
-p28 or p06 obd1 ecu if you have one with a s300 installed even better
Thats it for now. Please email me at ek9lsvtec96@yahoo.com if you have anything listed above. And please bump this thread for me.
Thanks, Sal
-99-00 civic si driver side engine bracket that comes off the block to go to the mount (they are 40 dollars new so keep that in mind if you have one to offer)
-b series 8-12.5lb aftermarket flywheel (must be in good condition, I prefer clutch masters, competition clutch, or act)
-aftermarket intake manifold for b16 head (I prefer jg/edelbrock performer x, victor x, or skunk2 pro series, possibly a ITR)
-68mm throttle body
-rc or precision 310cc injectors
-drive shaft shop 2.9 axles
-b series shift linkage
-92-00 half size civic radiator (nothing stock, either fluidyne, mishimoto, something like that)
-b18c lower timing covers inner and outer
-gsr/itr timing gear for crankshaft
-p28 or p06 obd1 ecu if you have one with a s300 installed even better
Thats it for now. Please email me at ek9lsvtec96@yahoo.com if you have anything listed above. And please bump this thread for me.
Thanks, Sal
Thread
Thread Starter
Forum
Replies
Last Post