Wanted: Damaged B16 Cylinder Head (Georgia)
#1
Who is Mr Robot?
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Wanted: Damaged B16 Cylinder Head (Georgia)
As the title states I am looking for a damaged/trashed bare B16 head.
I need one so I can cut it into sections to study certain areas of the casting for a project I have in mind. I don't care how damaged it is... Dropped valve, bent valve, bad valve guides, warped deck, decked too much, damaged/warped intake/exhaust sealing surfaces, stripped or damaged threads/holes/mounting points, certain damaged casting areas (spark plug tubes, valve cover gasket surface, etc. So long as the overall casting is intact is all that matters. However one combustion chamber in "fair" condition would be helpful
The head can be totally bare as well and by that I mean no valves, guides, stem seals, springs/retainers, LMAs, rocker shafts, rocker arms, cam caps, sensors, studs, vtec solenoid, literally 100% bare except for the actual casting.
The cheaper the better, I would even give you beer money lol. even free would be best (obviously I would cover shipping) since it's just going to get cut into sections to study. Possibly trade for some stock B/D/F parts I have laying around?
Post or PM with what you've got.
TIA
I need one so I can cut it into sections to study certain areas of the casting for a project I have in mind. I don't care how damaged it is... Dropped valve, bent valve, bad valve guides, warped deck, decked too much, damaged/warped intake/exhaust sealing surfaces, stripped or damaged threads/holes/mounting points, certain damaged casting areas (spark plug tubes, valve cover gasket surface, etc. So long as the overall casting is intact is all that matters. However one combustion chamber in "fair" condition would be helpful
The head can be totally bare as well and by that I mean no valves, guides, stem seals, springs/retainers, LMAs, rocker shafts, rocker arms, cam caps, sensors, studs, vtec solenoid, literally 100% bare except for the actual casting.
The cheaper the better, I would even give you beer money lol. even free would be best (obviously I would cover shipping) since it's just going to get cut into sections to study. Possibly trade for some stock B/D/F parts I have laying around?
Post or PM with what you've got.
TIA
#2
Re: Wanted: Damaged B16 Cylinder Head (Georgia)
I have a bare gsr head intact just dropped a valve in one cylinder and cracked a little of the combustion chamber. Let me know ur offer
#3
Honda-Tech Member
Re: Wanted: Damaged B16 Cylinder Head (Georgia)
Whats the most you will pay? i see them locally here all the time for decent prices i can maybe find one and have it shipped for like $300 or less something around there maybe even less than that cause these are usually still good heads but bare, i just have to make at least $20 for my time haha
#5
Who is Mr Robot?
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: Wanted: Damaged B16 Cylinder Head (Georgia)
Yea im not paying 300 for something that is going to get cut to pieces lol.
I'll text you guys tomorrow.
I'll text you guys tomorrow.
#6
Honda-Tech Member
Re: Wanted: Damaged B16 Cylinder Head (Georgia)
lol i wouldnt either im just saying i see them almost complete for that and as low as $150 for a dammaged bare head. So i mean after shipping it still would be around $200 but just trying to help out when i can lol ill be on the look out for something.
Thread
Thread Starter
Forum
Replies
Last Post
hybridpatient95
All Motor / Naturally Aspirated
3
03-20-2005 08:42 AM