Excel91CiViCsi

hey guys, up for sale is my 95 civic ex. car has about 160k miles on the shell. im going to be straight up with everything perfect and everything wrong with the car so there are no confusions or mishaps. when i got the car is was completely stock, i drove it for about a month and then bought the swap. the swap is a b17a1 out of an 93 integra gsr. the motor has around 90k miles on it. the transmission is out of an 2000 civic si, it has around 80k miles on it. there are no grinds or pop outs at all. the motor was installed about 5k miles ago, but at the time of the swap had a brand new cap and rotor put on, new plugs and plug wires, a brand new oem clutch, and a new fidanza 7lb flywheel. the motor has an 2000 civic is intake manifold setup on it that was on it when i got it. has a newer timing belt, and all new fluids. when motor is first started it runs a little wierd, it idles at around 3500k rpms, then lopes fomr 1k to 3k until warmed up. i was told its from a vacuum leak, and some say a sensor, but when its warmed up it doesnt do either and idles perfect and runs like a champ. it has an AEM short ram intake, there is a DC 4-1 header on it, an ebay test pipe(stock cat is included), and a brand new megan drift spec just installed last week. car is riding on brand new oem struts and H&R sport springs installed at time of swap. it has a pioneer headunit, and the interior is clean. there is a small indent in the dash on the passenger side right abover the glove box. paint is about a 7 out of 10 has little door dings and scratches here and there but is common for a 13 year old car. the only some what kmajor thing wrong is that the car had rearended a camry, and it cracked the front bumper and bent the bumpr support. it did not bend the radiator support, and i have a newer none cracked bumper and a new support to go with the car. support just needs put on.

had the caar dyno tuned by IMW of carlisle, PA about 3 weeks ago before the exhaust was put on and it made 152whp and 111wtq. Knock sensor and o2 sensor have been turned off.

im looking to get $4800 or trade for a 88-91 hatch with money on top if its worth less, an eg hatch, or clean ek. my email is excelryderz1@aim.com if you would like to ask any questions. thanks

-derek

Excel91CiViCsi

BUMP!

Excel91CiViCsi

daily bump

Excel91CiViCsi

bump

Excel91CiViCsi

bump get me an ef hatch kids

Excel91CiViCsi

bumppp itr cams now come with