OH FS/FT 87 Mustang w/ LS1
01-24-2013, 07:01 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Parma, OH, United States
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
FS/FT 87 Mustang w/ LS1 11 sec 400whp
Hey guys, just testing waters here. Thinking about selling/trading my car and want to see if anyone wants to trade anything good. If I had to put a price on it I would start at $7,600. Car is located in Northern Ohio.
The car is an 87 Mustang coupe, notchback if you prefer.
Engine:
LS1/T56 (6 speed) from a 04 GTO
LS6 intake
Trickflow cam 238/242 duration .595/.595 lift 112 lsa
Other:
Dynatech long tube headers
Dynamax exhaust
-6an braided fuel line w/ corvette fuel filter
Camaro cluster swapped in, all gauges work except fuel, separate gauge installed for that, speedo is slow, possibly speed sensor
Stock 8.8 rear end, was told it has 3.73 gears
On set of 10 hole rims for winter, drove on them all last year, but also have a set of pony wheels, crap tires for front but drag radials for rear.
Bad:
Car could use paint, it is faded and has spots with surface rust, under carriage is clean though, no rust.
No heat, climate control ***** were broken, but brand new heater core installed, just needs hoses run to it and new climate control ***** installed.
Wipers do not work. There are no arms/wipers, and they are not wired in, they just need to be extended due to rerouting for master cylinder for clutch. Motor and everything is there.
I ran best of 11.83 at 118 on slicks.
Car made 401whp on a mustang dyno.
Any questions just ask.
The car is an 87 Mustang coupe, notchback if you prefer.
Engine:
LS1/T56 (6 speed) from a 04 GTO
LS6 intake
Trickflow cam 238/242 duration .595/.595 lift 112 lsa
Other:
Dynatech long tube headers
Dynamax exhaust
-6an braided fuel line w/ corvette fuel filter
Camaro cluster swapped in, all gauges work except fuel, separate gauge installed for that, speedo is slow, possibly speed sensor
Stock 8.8 rear end, was told it has 3.73 gears
On set of 10 hole rims for winter, drove on them all last year, but also have a set of pony wheels, crap tires for front but drag radials for rear.
Bad:
Car could use paint, it is faded and has spots with surface rust, under carriage is clean though, no rust.
No heat, climate control ***** were broken, but brand new heater core installed, just needs hoses run to it and new climate control ***** installed.
Wipers do not work. There are no arms/wipers, and they are not wired in, they just need to be extended due to rerouting for master cylinder for clutch. Motor and everything is there.
I ran best of 11.83 at 118 on slicks.
Car made 401whp on a mustang dyno.
Any questions just ask.
Last edited by Hmotoredcoupe; 01-24-2013 at 08:19 AM.
01-25-2013, 07:22 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Parma, OH, United States
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/FT 87 Mustang w/ LS1
Easiest way to make a mustang fast!
Definitely, was looking into nitrous or turbo but I really don't have the time nor money to spend on it while in school. Car is a blast to drive as is and a complete sleeper.
Definitely, was looking into nitrous or turbo but I really don't have the time nor money to spend on it while in school. Car is a blast to drive as is and a complete sleeper.
Trending Topics
01-27-2013, 12:05 PM
#13
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Parma, OH, United States
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/FT 87 Mustang w/ LS1
Thread
Thread Starter
Forum
Replies
Last Post
3tc fooooo
Southern California (Sales)
23
06-21-2010 07:10 AM
3tc fooooo
Vehicles for sale
13
06-21-2010 05:13 AM