FS: 93 VR R1 Clean title, Modded, New Engine, $16,000
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Irvine, CA, USA
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
FS: 93 VR R1 Clean title, Modded, New Engine, $16,000
This RX-7 is a R1 model with a clean title. The car has never been in any accidents. 80,300 miles on chassis and 6,000 on new rebuilt engine. Car has the following mods:
- Rebuilt engine by Rotary Power (Race ported w/ 3mm apex seals (6k mi on engine)
- Newely installed ACT street/strip clutch at the time of rebuild (6k mi on clutch)
- HKS duel polished intakes
- HKS downpipe
- HKS CF/TI catback
- Mazdaspeed radiator
- Greddy lightweight racing pulleys
- Greddy turbo timer
- Cusco front strut bar
- Apexi Power FC (no commander)
- Stainless steel braided brake lines
- Stainless steel braided oil lines
- Brembo cross drilled rotors front and back)
- Autometer boost guage mounted to a steering column guage pod
- relocated battery to the rear (optima blue top)
- Viper Alarm system w/ keyless entry
The motor has 6k on it and was rebuilt by Rotary Power with a race port with 3mm apex seals. I had a recent compression test done on it and it all rotor faces read between 8.2-8.4. Twin turbos are non-sequential and work perfectly. The boost is set at 11 psi and they do not leak any oil. Car is in excellent condition and runs flawlessly.
pics of the car can be found here:
http://community.webshots.com/album/70105692YNpzIp
the pictures show the car with Advan wheels and the sound system but the wheels and system have been sold so the car will come with stock wheels and more room in the trunk
rear bins and rear center divider not shown in pics but the parts will be provided when car is sold.
NOTE: For Cali residents car IS NOT SMOG legal because of the ported engine, DP, and apexi PFC. When the car is sold I will provide the buyer with the stock intake, precat, and stock ecu to pass SMOG.
Price is $16,500 if I SMOG the car
$16,000 if the buyer SMOGS
please call me at 949 872 8270
or email me at mazdaspeed00@aol.com
Alan
- Rebuilt engine by Rotary Power (Race ported w/ 3mm apex seals (6k mi on engine)
- Newely installed ACT street/strip clutch at the time of rebuild (6k mi on clutch)
- HKS duel polished intakes
- HKS downpipe
- HKS CF/TI catback
- Mazdaspeed radiator
- Greddy lightweight racing pulleys
- Greddy turbo timer
- Cusco front strut bar
- Apexi Power FC (no commander)
- Stainless steel braided brake lines
- Stainless steel braided oil lines
- Brembo cross drilled rotors front and back)
- Autometer boost guage mounted to a steering column guage pod
- relocated battery to the rear (optima blue top)
- Viper Alarm system w/ keyless entry
The motor has 6k on it and was rebuilt by Rotary Power with a race port with 3mm apex seals. I had a recent compression test done on it and it all rotor faces read between 8.2-8.4. Twin turbos are non-sequential and work perfectly. The boost is set at 11 psi and they do not leak any oil. Car is in excellent condition and runs flawlessly.
pics of the car can be found here:
http://community.webshots.com/album/70105692YNpzIp
the pictures show the car with Advan wheels and the sound system but the wheels and system have been sold so the car will come with stock wheels and more room in the trunk
rear bins and rear center divider not shown in pics but the parts will be provided when car is sold.
NOTE: For Cali residents car IS NOT SMOG legal because of the ported engine, DP, and apexi PFC. When the car is sold I will provide the buyer with the stock intake, precat, and stock ecu to pass SMOG.
Price is $16,500 if I SMOG the car
$16,000 if the buyer SMOGS
please call me at 949 872 8270
or email me at mazdaspeed00@aol.com
Alan
Thread
Thread Starter
Forum
Replies
Last Post
krysted9354
Vehicles for sale
14
05-11-2011 05:02 AM
VtecKiDD
Vehicles for sale
3
07-22-2008 05:11 PM
J_J
Vehicles for sale
10
10-30-2006 06:51 AM
Craftyvtec
Vehicles for sale
13
02-27-2004 07:47 AM