So today I changed the clutch rubber lines with a stainless steel braided. I first drained the fluid. I have done this before but this time when replacing and fluid and lots of bleeding going on, something is off. When I press the clutch pedal, I does not retract, as if there is no fluid in the master cylindar. By the way I replaced the clutch master as well and the line from the master to the resivoir is really long now. Anyway what could I be doing wrong? I have went through about half a Liter just bleeding the bloody thing.

 

ttt.

when bleeding the fluid does not come through the line fully, it shoots through on the bottom half. Too much air in the line?

 

Anyone???