i have a hydro gsr trans in my 90 hatch with a b16a. well im using the hasport master cylinder adapter and the release sucks. anyone have better luck with a diff setup? i have a cable ls trans but that requires a new mount and diff clutch disc and rear bracket

 

what master cylinder are you using on the CMA?

 

https://honda-tech.com/forums/showth...ighlight=sonem

 

oem honda master cylinder. maybe an aftermarket would work better?

 

ive seen that lil bracket thing a few times....actually thought about it at first, havent even that setup used yet tho. id fab that bracket myself if i did go that route. dunno bout rippin out my vent tube and all

 

It shouldn't, there may be another problem. What is it doing, releasing too soon, too late?

brian g

 

doesnt quite grab till the very top of the pedal....ive bled the line many times. big diff between driving my daily d15b with a cable trans and this hydraulic frankenstein in my b16 swap ef.

 

You should be able to adjust the cable now until you get the release right where you need it.

brian g

 

i have the sonem setup in my crx with a hydro gsr, works great.....eliminates that POS cable completely......