Honda-Tech - Honda Forum Discussion

Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

Would a stock head gasket work?

Thread Tools
 
Search this Thread
 
Old May 14, 2010 | 10:15 AM
Share
  #1  
n008i3's Avatar
n008i3
Thread Starter
Honda-Tech Member
 
Joined: May 2008
Posts: 77
Likes: 0
From: Wisconsin
Default Would a stock head gasket work?
I honed my block .020" (81.5mm) over and was wondering if the stock OEM 81mm head gasket would work or would I have to get an over sized one. Any help is greatly appreciated. Thanks.
Reply
0
Old May 14, 2010 | 10:22 AM
Share
  #2  
DCFIVER's Avatar
DCFIVER
Honda-Tech Member
Community Builder
Liked
Loved
Community Favorite
 
Joined: Mar 2004
Posts: 4,840
Likes: 37
From: Looking for SloMofo....
Default Re: Would a stock head gasket work?
Originally Posted by n008i3
I honed my block .020" (81.5mm) over and was wondering if the stock OEM 81mm head gasket would work or would I have to get an over sized one. Any help is greatly appreciated. Thanks.
Wont work, but there are gaskets made for 81.5mm
Reply
0
Old May 14, 2010 | 11:10 AM
Share
  #3  
97ek-t's Avatar
97ek-t
Honda-Tech Member
 
Joined: Sep 2008
Posts: 68
Likes: 0
From: temple, tx
Default Re: Would a stock head gasket work?
ive done it alot of times and never had a problem with it even on a 600whp car
Reply
0
Old May 14, 2010 | 06:10 PM
Share
  #4  
n008i3's Avatar
n008i3
Thread Starter
Honda-Tech Member
 
Joined: May 2008
Posts: 77
Likes: 0
From: Wisconsin
Default Re: Would a stock head gasket work?
Originally Posted by 97ek-t
ive done it alot of times and never had a problem with it even on a 600whp car
could anyone else confirm this??? not saying that i don't trust you, just want to get a few more input b4 i actually put the head on.
Reply
0
Old May 14, 2010 | 06:31 PM
Share
  #5  
non-VTEC's Avatar
non-VTEC
Honda-Tech Member
 
Joined: Jan 2000
Posts: 6,212
Likes: 2
From: Toronto, Canada
Default Re: Would a stock head gasket work?
it will work fine. OEM gaskets are already made for 81.5mm bores since that is the service limit when over boring the cylinders.
Reply
0
Old May 14, 2010 | 08:05 PM
Share
  #6  
riceburner700's Avatar
riceburner700
Honda-Tech Member
 
Joined: Jan 2007
Posts: 559
Likes: 0
From: loveland co, United States
Default Re: Would a stock head gasket work?
will work just fine slap it on
Reply
0
Old May 16, 2010 | 10:20 AM
Share
  #7  
n008i3's Avatar
n008i3
Thread Starter
Honda-Tech Member
 
Joined: May 2008
Posts: 77
Likes: 0
From: Wisconsin
Default Re: Would a stock head gasket work?
Thanks for all the feedback! Greatly appreciated! :D
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stupid z6 head gasket question.
okBYE
Honda Civic / Del Sol (1992 - 2000)
6
May 22, 2011 11:12 AM
will an oem headgasket work on a 81.5mm bore?
01geeser
All Motor / Naturally Aspirated
9
Oct 11, 2006 07:38 PM
Head gasket question Cometic
Rspec CX
All Motor / Naturally Aspirated
3
Apr 16, 2004 08:10 AM
Tags
Back to Subforum
Tech / Misc
View Next Unread
b16a cooling system pressure?




Advanced Search

All times are GMT -8. The time now is 02:24 PM.