Will this clutch and flywheel work?
New User
Joined: Apr 2001
Posts: 493
Likes: 0
From: Cold, Wintery, Hell
Re: Will this clutch and flywheel work? (92tealvx)
The clutch disk and flywheel should work, but the pressure plate won't. Cable clutches are different than ones for hydraulic transmissions.
[Modified by vtecivicex, 6:53 AM 1/23/2003]
[Modified by vtecivicex, 6:53 AM 1/23/2003]
Honda-Tech Member
Joined: Apr 2000
Posts: 8,757
Likes: 0
From: WI
Re: Will this clutch and flywheel work? (vtecivicex)
No no no
flywheel and pressure plate WILL work.
the disc may or may not. 92-93 Non vtec integra are the same as later models, but im not sure
about the 92-93 gsr. Easy way to check is to try to put the disc on the newer trans.
It should be the same as well though.
flywheel and pressure plate WILL work.
the disc may or may not. 92-93 Non vtec integra are the same as later models, but im not sure
about the 92-93 gsr. Easy way to check is to try to put the disc on the newer trans.
It should be the same as well though.
Honda-Tech Member
Joined: Oct 2000
Posts: 4,490
Likes: 2
From: GTA, ON, Canada
Re: Will this clutch and flywheel work? (92tealvx)
yes it will work. we have a YS1 running an ITR clutch combo without problems. I ran a YS1 disc in my B16A (EG) for very short while as well.
the only b-series disc thats different is the 90-1 which was found in S1/J1/Y1 tranny. (flywheel and pressure plate will)
the only b-series disc thats different is the 90-1 which was found in S1/J1/Y1 tranny. (flywheel and pressure plate will)
Thread
Thread Starter
Forum
Replies
Last Post
methanemotorworks
Tech / Misc
3
Feb 13, 2006 07:32 PM
thecorey
Honda CRX / EF Civic (1988 - 1991)
7
Sep 27, 2002 03:03 PM
