Where's the best place for cipping ECU's?
Thread Starter
Honda-Tech Member
Joined: Nov 2002
Posts: 4,251
Likes: 1
From: Dreaming of east Tennessee!
Where's the best place for chipping ECU's?
I know of places like INLINEFOUR but I wasn't shure if there's more to choose from than just those guys. It's around $185.00 round trip for them but what are my options? Thanks. 
Modified by HYREV2NR at 6:09 PM 8/28/2004
Modified by HYREV2NR at 6:09 PM 8/28/2004
Joined: Mar 2002
Posts: 101
Likes: 0
From: SO, CALI
Re: Where's the best place for chipping ECU's? (HYREV2NR)
i can chip your ecu, give me an email.... djxquake@yahoo.com
Honda-Tech Member
Joined: May 2003
Posts: 5,735
Likes: 0
From: Portland, Oregon
Re: Where's the best place for chipping ECU's? (rtzcom)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HYREV2NR »</TD></TR><TR><TD CLASS="quote">I know of places like INLINEFOUR but I wasn't shure if there's more to choose from than just those guys. It's around $185.00 round trip for them but what are my options? Thanks. </TD></TR></TABLE>
Holy smokes! $185 just to chip your ECU??
What all do they do for that much money? I'm assuming they would install the nesessary resistor, capacitors, 74HC373 IC, and 28-pin DIP and ZIF sockets...geeze for that much they better throw in an EPROM burner and datalogging cable...
Yeah, don't pay $185 to have someone solder in a few components that only add up to about $15...
Holy smokes! $185 just to chip your ECU??
What all do they do for that much money? I'm assuming they would install the nesessary resistor, capacitors, 74HC373 IC, and 28-pin DIP and ZIF sockets...geeze for that much they better throw in an EPROM burner and datalogging cable...
Yeah, don't pay $185 to have someone solder in a few components that only add up to about $15...
Honda-Tech Member
Joined: Nov 2002
Posts: 3,360
Likes: 1
From: Phoenix, AZ, USA
Re: Where's the best place for chipping ECU's? (EJ1 wilcox)
Because everyone and their mom now chips ECUs, $50-$75 is going rate nowadays... Now you just have to sift through the wide variety of assclowns that have a soldering iron, a burner, and a freeware editor and think they suddenly know everything about it... 
Trending Topics
New User
Joined: Aug 2001
Posts: 4,879
Likes: 3
Re: (TGARCIARACING)
Anybody these days can chip an ECU.... either cheap or expensive but they the outcome (if they solder it in correctly) is the same. Your main concern should be what program you are going to be running for your particular motor setup and not just whatever is given to you.
B*a*n*n*e*d
Joined: Jan 2002
Posts: 7,177
Likes: 0
From: retired 2/13/10
Re: (TGARCIARACING)
since we are on the subject of tuning and chipping. would anyone of u guys care to take a look at my current ROM im running??? i got the basemap off another programmer and just tweaked it a bit. so its sorta the first ROM that i have changed and actually ran.
FYI, i just ran 11.62 last weekend but of course im just lookin for other opinions on the ROM. i will give a mod list to anyone that wants to take a peek.
FYI, i just ran 11.62 last weekend but of course im just lookin for other opinions on the ROM. i will give a mod list to anyone that wants to take a peek.
Honda-Tech Member
Joined: Jun 2003
Posts: 1,052
Likes: 0
From: KC, KS
Re: Where's the best place for chipping ECU's? (HRTuning)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HRTuning »</TD></TR><TR><TD CLASS="quote">Now you just have to sift through the wide variety of assclowns that have a soldering iron, a burner, and a freeware editor and think they suddenly know everything about it... </TD></TR></TABLE>
dont call me an assclown!
just go wherever is cheapest and has chipped an ecu before. IMO
</TD></TR></TABLE>dont call me an assclown!
just go wherever is cheapest and has chipped an ecu before. IMO
Thread
Thread Starter
Forum
Replies
Last Post
mrbig
All Motor / Naturally Aspirated
3
Feb 15, 2005 06:21 AM