im going to be using je pistons 10.1 .20 over pistons in an h23 block...what rods could i use . would i still be able to use the stock crank?. thanks in advance

 

eagles, crower, pauter, yes you can use the stock crank, just need to get the proper bearings and your set

 

You will also need sleeves to run the JE's.
Glenn

 

even if its not that much that they're taking off the block

 

I don't think Eagle sells a rod for the H23, only the H22
Pauter H23's in stock but they are expensive.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dizzyroc88 &raquo;</TD></TR><TR><TD CLASS="quote">even if its not that much that they're taking off the block</TD></TR></TABLE>

The material that is used for the oem cylinder walls is not compatible with forged pistons.
Glenn

 

i forgot about that....

the rods i found were some crower billet rods