There was a post a couple of months back about putting a fitting in to bypass the stock fuel pressure regulator for an external one, problem is I can't find that post any more. Can someone please tell me what fitting and tap should I buy to tap into the hole for the fpr.

Thanks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turtle-eg &raquo;</TD></TR><TR><TD CLASS="quote">There was a post a couple of months back about putting a fitting in to bypass the stock fuel pressure regulator for an external one, problem is I can't find that post any more. Can someone please tell me what fitting and tap should I buy to tap into the hole for the fpr.

Thanks.</TD></TR></TABLE>

I'de assum it is a 1/8 npt.. Thats what thread is where my fpr goes on my aem fuel rail.. You should just be able to drill and tap it out to 1/8.. If I were using a stock rail I would plug that hole and put a bigger fitting on the end of the fuel rail and go from there to the external fpr, Thats how my aem rail it setup..