Weber cams. ls/non-vtec?
#1
Thread Starter
Join Date: Jun 2002
Location: Portage, MI, USA
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Weber cams. ls/non-vtec?
anyone heard of weber cams? do they have a website that i can check out lift/duration specs for them on?
JDMchris is selling them for b18b, that's why i'm asking.
JDMchris is selling them for b18b, that's why i'm asking.
#4
Honda-Tech Member
Re: Weber cams. ls/non-vtec? (DOHC-DX)
Are weber cams regrinds?
If so, I would stay away from them.....If you don't know then I would consider finding out.
If so, I would stay away from them.....If you don't know then I would consider finding out.
#5
Thread Starter
Join Date: Jun 2002
Location: Portage, MI, USA
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weber cams. ls/non-vtec? (Spade)
yeah web cams are re-grinds. so far, i've heard good things about them. still researching
http://webcamshafts.com
http://webcamshafts.com
#6
Honda-Tech Member
Re: Weber cams. ls/non-vtec? (DOHC-DX)
Regrinds wear at a much higher rate than ground cores do......I would honestly consider going with Crower......but, that's me.
Plus, Crower advertises there specs.
Plus, Crower advertises there specs.
#7
Thread Starter
Join Date: Jun 2002
Location: Portage, MI, USA
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weber cams. ls/non-vtec? (Spade)
web cam has their specs listed on their site. i just didn't know what their site was.
well, i can get a good deal on a set with 15k on them. for regrinds, i'm hoping that this is just the beginning of their life. any comments on that?
well, i can get a good deal on a set with 15k on them. for regrinds, i'm hoping that this is just the beginning of their life. any comments on that?
Trending Topics
#8
Honda-Tech Member
Re: Weber cams. ls/non-vtec? (DOHC-DX)
If they are good now, they will last a long time. Check them for flat lobes, anything that's not smooth on the lobe surface or any lobe that looks different than all the other lobes. All lobes should feel smooth with nothing that feels like a corner. Hard to explain on paper.
Thread
Thread Starter
Forum
Replies
Last Post
fukb20
All Motor / Naturally Aspirated
5
12-06-2012 10:27 AM