Here is my printout from today......
(Rear passenger side was adjusted only)



And this one is when I just got the front done 5 days before:
(front were both adjusted since I have the skunk2 camber kit in)
(rear was to much, so I had to install washers / longer bolts)



Went from over 3 degrees down to about 1 1/2 degrees which falls under the 2 degrees specified

That's 3 3/8th galvanized washers on each 45mm length bolt.

Finally my drop is done :sleep:

Thanks to all for the help from choosing the camber kit, to purchasing the GC's, the shops to deal with, to installing it all!!!