vtec pressure switch problems
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 577
Likes: 0
From: underground
vtec pressure switch problems
ok im runnin a jdm b16a in my crx, jdm pw0 ecu w/ hasport vtec subharness
since ive installed the motor ive gotten rid of 3 codes but im left with the 22. Ive got a not TOO crazy dent in my oil pan. When i start the car on the code begins within 3-5 seconds of ignition...does this sound like a result of the dent? bad wiring? or a problem with the switch itself?
i see alot of people having the code pop up after hard driving in my search, but mine pops up almost automatically
since ive installed the motor ive gotten rid of 3 codes but im left with the 22. Ive got a not TOO crazy dent in my oil pan. When i start the car on the code begins within 3-5 seconds of ignition...does this sound like a result of the dent? bad wiring? or a problem with the switch itself?
i see alot of people having the code pop up after hard driving in my search, but mine pops up almost automatically
Thread
Thread Starter
Forum
Replies
Last Post
1SikEagle
Honda Civic / Del Sol (1992 - 2000)
3
Apr 11, 2009 01:02 PM
whophlungpoo
Honda CRX / EF Civic (1988 - 1991)
10
Oct 1, 2006 10:52 AM
