Traction Bar binding issues!?
Thread Starter
Joined: Apr 2001
Posts: 2,090
Likes: 0
From: Northwest Tri Cities Kennewick, WA, USA
Traction Bar binding issues!?
I will be purchasing a set of traction bars for my turbo H22 eg in the very near future, I need to know of anyone who is having any binding issues with their traction bars, and if so, what brand?
Honestly I want to know if when I take a hard corner or high speed corner or bump where the suspension will be extremely compressed if I am going to have any problems!! For example, if I want to roadrace, will I have to remove the bars?
Honestly I want to know if when I take a hard corner or high speed corner or bump where the suspension will be extremely compressed if I am going to have any problems!! For example, if I want to roadrace, will I have to remove the bars?
Joined: Sep 2002
Posts: 1,769
Likes: 0
From: Orange County, CALIFORNIACATIONATED, USA
Re: Traction Bar binding issues!? (Hondaddict)
Competition Engineering and Z10 are suppose to bind the most because the bars do not line up with the suspension.
JimFab traction bars do line up with the suspensions pivot points and will offer the least amount between the 3.
http://www.jimfab.com
-10k
JimFab traction bars do line up with the suspensions pivot points and will offer the least amount between the 3.
http://www.jimfab.com
-10k
Thread
Thread Starter
Forum
Replies
Last Post
kalbs
Suspension & Brakes
12
Aug 15, 2007 06:33 PM
92hatchattack
Suspension & Brakes
8
Jun 17, 2006 08:44 AM
