I have a YS1 tranny that I would like to put back together tommorow but I need the torque specs of the following. Thanks in advance

Transmission case bolts

Bolt that keeps the reverse gear shaft from rotating

Cover plate that you have to remove to get to the intermediate shaft snap ring

Detent ball cover bolts

 

I do not know these offhand. Search google for "hondahookup manuals". Find the appropriate one for your transmission.

 

Countershaft locknut 65 ft/lbs
End cover 108 in/lbs
Selector arm holder bolts 108 in/lbs
Transaxle case to housing 20 ft/lbs
Transaxle to engine 4spd 33 ft/lbs
Transaxle to engine 5spd 30 ft/lbs

From the haynes manual 1984 thru 1991

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thesmogman &raquo;</TD></TR><TR><TD CLASS="quote">From the haynes manual 1984 thru 1991</TD></TR></TABLE>



1st, even if it was for the right engine, I've seen so many wrong torque specs in a haynes it's not even funny. Second of all, the YS1 is not in that manual, period, and is a very different transmission. Get the right manual, which is the one printed by Helm, Inc. and no other.

 

That is why I put it was from a haynes.

That is all I got. That is all I have to offer.

Sorry, I have the one for my car only and it works for me. I don't even have a torque wrench.

At least I tried. unlike some.

 

Yes thank you for the effort it's much appreciated, I'm downloading the manual from hondatech.info for the 93 integra. I cant find one difference between the b18 Ys1 and mine besides the gearing.