Timing Question.. (I searched)
Thread Starter
B*a*n*n*e*d
Joined: Feb 2002
Posts: 6,621
Likes: 0
Timing Question.. (I searched)
I have a 2 layer headgasket on my recent build, but when i went to line up my cam gears they are a hair off. Im assuming this is because of the lack of 3rd layer in the gasket.
how do i set the cam gears to compensate for this?
My car is lacking alot of power, and im not sure if this is it, or because i need tuning despertly.
how do i set the cam gears to compensate for this?
My car is lacking alot of power, and im not sure if this is it, or because i need tuning despertly.
Joined: Mar 2004
Posts: 182
Likes: 0
From: Orlando, FL, USA
Re: Timing Question.. (Swags04)
set the block to 16 degrees before TDC, then set the cam. If that dont work, pull the cam gear off, turn it over and check the key to see if it has moved at all. This happend to me once!!
Thread
Thread Starter
Forum
Replies
Last Post