Timing Belt to use 20vtec?
Thread Starter
Honda-Tech Member
Joined: Nov 2012
Posts: 32
Likes: 0
Timing Belt to use 20vtec?
What size Timing Belt to use on a b20 crv vtec engien?
Does a b18c 96spec TypeR Timing belt fit? or should it be original Honda b20 timing belt? because I have doubts about the length is the same?
Does a b18c 96spec TypeR Timing belt fit? or should it be original Honda b20 timing belt? because I have doubts about the length is the same?
Honda-Tech Member
Joined: Jan 2004
Posts: 1,059
Likes: 2
From: houston, texas, usa
Re: Timing Belt to use 20vtec?
It depends on what water pump you're using. Non vtec (19 tooth) use a non vtec belt. LS and CRV are the same. Vtec (22 tooth) use a vtec belt. GSR and R are the same.
Thread Starter
Honda-Tech Member
Joined: Nov 2012
Posts: 32
Likes: 0
Re: Timing Belt to use 20vtec?
Okay i am runing vtec Itr pump that is 22 tooth i think. I'll check it out later today, to be sure.
Then I will probably run with original honda vtec timing belt from at 96spec itr 1.8 engien.
Then I will probably run with original honda vtec timing belt from at 96spec itr 1.8 engien.
DO IT ON ALL FOURS
Joined: Sep 2007
Posts: 7,632
Likes: 15
From: IN Your Mind
Re: Timing Belt to use 20vtec?
If you use a LS/B20 water pump then use a 90-01 LS/B20 belt.
If you use an ITR/GSR/B16 water pump then use a 94-01 GSR/ITR timing belt.
It is really that simple.
If you use an ITR/GSR/B16 water pump then use a 94-01 GSR/ITR timing belt.
It is really that simple.
Thread
Thread Starter
Forum
Replies
Last Post