Im having problems with my tilton and was wondering if anyone has faced this? It's a full Tilton clutch kit w/hydro t/b kit that I have. When I sit still the pedal feels fine, I put it into gear and the pedal gets stuck to the floor and wont come back up... I need help guys !!!


Thanks

 

did you bleed your clutch alot of times b4 you started it up.

 

Yes. Ive been driving it on the street for 2 months just fine! Then all of the sudden this problem occured tonight... I dont know what it could be??? I even bled the clutch again(actually flush the whole clutch fluid) I dont think its the pressure plate???? I think its the clucth master but i dont see any leaks

 

maybe your hydraulic release bearing took a ****?

 

Yea I hope you're right along with my hopes of it being a simple leak or anything along the T/B kit... Those parts are way cheaper than the clutch

 

Anyone else have ideas or opinions?

 

Anyone???

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mmuller &raquo;</TD></TR><TR><TD CLASS="quote">maybe your hydraulic release bearing took a ****?</TD></TR></TABLE>

I agree

 

so wait, when you "sit still" do you mean in neutral? can you depress the clutch pedal and it will come back up? or once you press the clutch pedal down it doesn't come back?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JL &raquo;</TD></TR><TR><TD CLASS="quote">so wait, when you "sit still" do you mean in neutral? can you depress the clutch pedal and it will come back up? or once you press the clutch pedal down it doesn't come back?</TD></TR></TABLE>
When it's in nuetral the pedal will feel fine... When I put it in gear and try to drive off it gets stuck to the floor

 

 

Is there presure when you step on it? or does it just drop straight to the floor? I've never seen the hydro t/b but how do you bleed it?