for those with knowledge
Thread Starter
New User
Joined: Jul 2001
Posts: 459
Likes: 0
From: Witty Comment....., Stunning Response...., Follow Up Gag.....
for those with knowledge
O.K. I need to know a CRX 87 with a turbo b18 weighing about 2000lb with slicks,
head work, stroker kit, short throw shifter and a clutch,
what kind of times would you get?
Second thing, i am going to build a car like that and if you were building a turbo b18 what would yeild the most HP,
_______
head work, stroker kit, short throw shifter and a clutch,
what kind of times would you get?
Second thing, i am going to build a car like that and if you were building a turbo b18 what would yeild the most HP,
_______
Honda-Tech Member
Joined: Aug 2001
Posts: 1,155
Likes: 0
From: Vail, CO, US
Re: for those with knowledge (BOO YEAH)
This question is on the level of "how do I fill a glass up with water?" Take some time out and do your own research.
[Modified by riceboy, 7:55 PM 4/14/2002]
[Modified by riceboy, 7:55 PM 4/14/2002]
Re: for those with knowledge (riceboy)
I think you can leave out the short throw shifter part.
Thread Starter
New User
Joined: Jul 2001
Posts: 459
Likes: 0
From: Witty Comment....., Stunning Response...., Follow Up Gag.....
Re: for those with knowledge (tonyxcom)
thats funny, so when i do find it out and create the fastest street legal honda in the us how hard wll you laugh???? I am not a honda person so i don't know ****, iam trying to include hondas in my shop and want to build the baddest one possible so asking the know it alls was my first idea, sorry
Re: for those with knowledge (BOO YEAH)
thats funny, so when i do find it out and create the fastest street legal honda in the us how hard wll you laugh???? I am not a honda person so i don't know ****, iam trying to include hondas in my shop and want to build the baddest one possible so asking the know it alls was my first idea, sorry
Trending Topics
Honda-Tech Member
Joined: Sep 2001
Posts: 12,176
Likes: 2
From: Tucson, AZ
Re: for those with knowledge (BOO YEAH)
thats funny, so when i do find it out and create the fastest street legal honda in the us how hard wll you laugh???? I am not a honda person so i don't know ****, iam trying to include hondas in my shop and want to build the baddest one possible so asking the know it alls was my first idea, sorry
hows this
HAHAHAH
ROFL
your hopes are up too high. youll never be the "fastest street legal honda".
Honda-Tech Member
Joined: May 2001
Posts: 5,089
Likes: 1
From: Trinidad, W.I.
Re: for those with knowledge (BOO YEAH)
O.K. I need to know a CRX 87 with a turbo b18 weighing about 2000lb with slicks,
head work, stroker kit, short throw shifter and a clutch,
what kind of times would you get?
Second thing, i am going to build a car like that and if you were building a turbo b18 what would yeild the most HP,
_______
head work, stroker kit, short throw shifter and a clutch,
what kind of times would you get?
Second thing, i am going to build a car like that and if you were building a turbo b18 what would yeild the most HP,
_______
Is this a spoon crate motor ? Swap the cams for the crower 403's, CTR pistons and if you plan on being the fastest streetable honda, you will have to invest in a Motec exhaust and no less than (2) T-66 turbos. A holley double pumper can be fitted, but then, when you go thru tech, they will fall on the floor laughing, so maybe you shouldn't... ahh.... Monday humor.
Honda-Tech Member
Joined: Aug 2001
Posts: 1,155
Likes: 0
From: Vail, CO, US
Re: for those with knowledge (X2BOARD)
This setup will yield precisely 395.47 wHp (343.9 w/o the short shifter) at 25psi on stock internals. It should net a 9.82 @ 162 at 100ft ASL.
Is this a spoon crate motor ? Swap the cams for the crower 403's, CTR pistons and if you plan on being the fastest streetable honda, you will have to invest in a Motec exhaust and no less than (2) T-66 turbos. A holley double pumper can be fitted, but then, when you go thru tech, they will fall on the floor laughing, so maybe you shouldn't... ahh.... Monday humor.
Is this a spoon crate motor ? Swap the cams for the crower 403's, CTR pistons and if you plan on being the fastest streetable honda, you will have to invest in a Motec exhaust and no less than (2) T-66 turbos. A holley double pumper can be fitted, but then, when you go thru tech, they will fall on the floor laughing, so maybe you shouldn't... ahh.... Monday humor.
lmgdao-T66 turbos wont even cut on that set up, gonna need three inch primarys feeding three T-88's. and have one motec exhaust on each one of them, less backpressure for the fastest street legal honda ever.
Joined: Apr 2002
Posts: 2,316
Likes: 0
From: San Jose, CA, USA
Re: for those with knowledge (BOO YEAH)
"I am not a honda person so i don't know ****, iam trying to include hondas in my shop and want to build the baddest one possible so asking the know it alls was my first idea, sorry"
-If you don't know anything about Hondas, how do you expect to build the fastest?
The only way I think you'll achieve that status is if you throw on the TWO T66 turbos, along with a JRSC. And along with the JRSC, you should use a D16Z6 Intake Manifold. I'll be sure to look for you in the grand daddy mag, Super Street. Just be sure to give me my props on my recommendations.
[Modified by acuracing, 1:38 AM 4/16/2002]
-If you don't know anything about Hondas, how do you expect to build the fastest?
The only way I think you'll achieve that status is if you throw on the TWO T66 turbos, along with a JRSC. And along with the JRSC, you should use a D16Z6 Intake Manifold. I'll be sure to look for you in the grand daddy mag, Super Street. Just be sure to give me my props on my recommendations.
[Modified by acuracing, 1:38 AM 4/16/2002]
Thread
Thread Starter
Forum
Replies
Last Post
Lei Siew Long
Tech / Misc
29
Feb 20, 2002 02:44 PM