Hey guys I am in the process of building my race car (90 crx b18 ls/vtec turbo) anyways i am going to use a 92 LS tranny with it. in my 95 civic b18 turbo i cannot get traction even with the phantom slip. since this crx will be a pretty much race only car but with the occasional runs down to the local meet ups but there is no sharp turns - no sharper then id have to take at a dragway anyway

would she hold together with a spool?
note. Obviosly I wont be cutting the wheel even close to all the way


I used to have a spool front and back with my 83 f-150 and drove that all the time on the street with no problems.

and again this is not my daily driver it is going to be my race car and might come out on the streets like once a month.

Kyle

 

i rocked a welded GSR differential in my old school b20 setup years ago. it was fine.. for a while. you just have to make real long turns.
after 3 months, i ended up replacing my passenger side cv twice.

i learned my lesson. LSD or open diff. those are your only 2 options. lol.

 

something I'm building for a friend, Richmond Spool, Hydro LS tranny.......



He intends doing plenty of street time. I think he is crazy though!