Hi, just installed the Skunk2 intake manifold on a B16A2 (EK4). Idle is now very low and if I give it any gas it cuts out. Any ideas please?

Thanks

EDIT: I can increase the revs so long as I do so very slowly, any more and you can hear it sucking more air but it dies.


EDIT 2: Solved, IACV and your IAT plus the wrong way round :D

Modified by urzrkymn at 8:58 AM 10/15/2006


Modified by urzrkymn at 9:59 AM 10/15/2006