sizing bearings on 2000 b16a
#1
Thread Starter
Join Date: Aug 2002
Location: salt lake city, utah, united states
Posts: 1,173
Likes: 0
Received 0 Likes
on
0 Posts
sizing bearings on 2000 b16a
please help im building a 2000 b16a for turbo and i need some help sizing the bearings.
should i buy new ones that are the same that came out and start measuring there
or should i measure the used ones that came out of my motor and start from there
my crank has been machined and micropolished and so have all the bearing journals so im sure that i will need larger bearings
please help
thanks
should i buy new ones that are the same that came out and start measuring there
or should i measure the used ones that came out of my motor and start from there
my crank has been machined and micropolished and so have all the bearing journals so im sure that i will need larger bearings
please help
thanks
#2
Honda-Tech Member
Re: sizing bearings on 2000 b16a (egcivicturbo)
Buy one new set - doesn't really matter what size, say green for example - and measure all the journals using it. Then according to the readings, buy bigger or smaller bearings for each journal.
Here's instructions on how to do it:
http://www.c-speedracing.com/howto/b.../bearings.html
Here's instructions on how to do it:
http://www.c-speedracing.com/howto/b.../bearings.html
Thread
Thread Starter
Forum
Replies
Last Post