Are all of the B-series throttle body gaskets the same? can I use a B16 gasket on a B18C? I did some searching on this to no avail and the guy at my local honda dealership looked at me as if I were insane asking him this today. thanks fellas

 

No, the B16 and the B18c are different..You have to buy the gasket that goes with the throttle body you are using. EX: If you are putting a b16 throttlebody on a GSR intake Manifold you have to buy the b16 gasket becasue the vaccum lines are in different spots on the throttle body..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1FastCoupe &raquo;</TD></TR><TR><TD CLASS="quote">No, the B16 and the B18c are different..You have to buy the gasket that goes with the throttle body you are using...</TD></TR></TABLE>

Well I have a skunk2 gsr throttle body and a skunk2 gsr intake manifold. I need to use a gsr throttle body gasket is what your saying? thank you for the reply

 

The skunk2 throttle body comes with a gasket. I would use that one. I have a Skunk2 throttle body on a victor X manifold and I just used the gasket that came with the skunk2 throttle body and it works fine. My above statement refers to stock parts only.

 

hmm I'll look into this, I didnt see a gasket in my box.....

 

whudda ya know, there was one under all the **** in the box, thanks man