Serious Question and need help!
Thread Starter
New User
Joined: Jun 2001
Posts: 109
Likes: 0
From: Where the red fern grows
Serious Question and need help!
I ahve tried to get the exact info by searchs and calling around but keep getting different stories. I need to hear from someone that has actually put a ITR limited slip into a b16 tranny (99SI) What will i need to make it work.
Thanks for the time
Dave
Thanks for the time
Dave
Honda-Tech Member
Joined: Aug 2000
Posts: 245
Likes: 0
From: South Bend, IN, USA
Re: Serious Question and need help! (idrivered)
Eh, **** my bad, I thought you meant the JDM ITR FD, guess I should read closer next time 
. I would talk to Mike K on this, but AFAIK you'll need ITR differential bearings at the very least... EV.
[Modified by ElectronVTEC, 10:46 PM 8/21/2001]
. I would talk to Mike K on this, but AFAIK you'll need ITR differential bearings at the very least... EV.[Modified by ElectronVTEC, 10:46 PM 8/21/2001]
Thread Starter
New User
Joined: Jun 2001
Posts: 109
Likes: 0
From: Where the red fern grows
Re: Serious Question and need help! (ElectronVTEC)
I have the bearings but my problem is the ring gear does not fit over the differential housing. what do i need to get or do for it to be put back together and work properly
Thread
Thread Starter
Forum
Replies
Last Post
