I'm 95% of the way through completing my s2k ap2 cluster swap in my civic em1 coupe.
But there are a couple of wires that don't match up with any of the pinout guides I have.

Its the engine check light (green/orange) and the alternator warning light (white/blue).
None of these wires exist on my s2k cluster loom.
Instead, I have a yellow wire and a black wire where they should be.
I assume they are additional 12v source and a ground wires.

The loom is from an '08 s2k and the cluster is from an '06 if thats of any importance.
Please help, I'm so close to having it finished. Everything works except those 2 lights!

Thanks