Rough Idle
Thread Starter
Joined: Nov 2001
Posts: 218
Likes: 0
From: Philly, pa, usa
Rough Idle
Hey what's up tech?
I recently did a nice swap to my 2001 gs-r. I put in a a b18c5 block, ported b18c1 head w/ itr valves, valvetrain, ctr cams, skunk2 mani and 8.8 flywheel. After i put that in I idle really bad so I scanned the car and both my o2 were bad so i replaced them and the car idles better, but is still rough going from 900-almost 0 and stallying out. its a intermintent idle problem. I think the problem is that i'm still running a stock OBD2b ecu. any others out there have this problem?
I recently did a nice swap to my 2001 gs-r. I put in a a b18c5 block, ported b18c1 head w/ itr valves, valvetrain, ctr cams, skunk2 mani and 8.8 flywheel. After i put that in I idle really bad so I scanned the car and both my o2 were bad so i replaced them and the car idles better, but is still rough going from 900-almost 0 and stallying out. its a intermintent idle problem. I think the problem is that i'm still running a stock OBD2b ecu. any others out there have this problem?
Thread
Thread Starter
Forum
Replies
Last Post