Resistor Box and Injector question
Thread Starter
Member
Joined: Oct 2001
Posts: 1,605
Likes: 0
From: Upstate, NY
Resistor Box and Injector question
I have an Injector resistor box out of a 89 CRX si. I have the four fuel injectors. They are cut away from the resistor box. On the box there are 4 red/black and 1 yellow/black. My question is: Does it matter what injector goes to what wire coming off of the resistor box? If it does matter can some one please tell me the proper way to hook up the fuel injectors to the box.
Another question I have is will the 89 Integra PG7 ECU work or do I need the Si ecu?
[Modified by ZC_CRX, 2:41 PM 12/1/2002]
Another question I have is will the 89 Integra PG7 ECU work or do I need the Si ecu?
[Modified by ZC_CRX, 2:41 PM 12/1/2002]
Honda-Tech Member
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Re: Resistor Box and Injector question (ZC_CRX)
It doesn't matter which red/black wire you use for each injector.... Just make sure on the interior harness that you connect the 2 main injector grounds then run them to the box from there..... Also the PG7 should work just fine....
Thread Starter
Member
Joined: Oct 2001
Posts: 1,605
Likes: 0
From: Upstate, NY
Re: Resistor Box and Injector question (JDMspecEG6)
Just make sure on the interior harness that you connect the 2 main injector grounds then run them to the box from there
Thread
Thread Starter
Forum
Replies
Last Post
markgo
Honda CRX / EF Civic (1988 - 1991)
7
Nov 8, 2006 11:39 AM