Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

removal of front wheel stud

Thread Tools
 
Search this Thread
 
Old Mar 20, 2004 | 09:58 PM
  #1  
Must be VTEC's Avatar
Thread Starter
 
Joined: Nov 2003
Posts: 51
Likes: 0
From: Newell, Iowa, USA
Default removal of front wheel stud

Sup guys? Have a 96 Teg LS. Goin to take friends home and car started to shake like a ****. Didint know what is was till I drove 25 miles to my house and took off the wheel...........KINDA. Wheel fell off and was only being hold on by 2 studs . So was just wondering how to take the studs out to replace them. Thanx
Reply
Old Mar 21, 2004 | 12:34 AM
  #2  
MPower332TI's Avatar
 
Joined: Apr 2002
Posts: 2,537
Likes: 0
From: TENNESSEE
Default Re: removal of front wheel stud (Must be VTEC)

Basically its retarded. Really it is. To do it right you have to have the wheel bearing pressed out and seperated and then replace the studs, then get the new wheel bearing installed. Or you can be ghetto and grind a little notch in the backside of the hub so that you can turn it and line one stud up at a time and knock it out with a hammer. Have fun.
Reply
Old Mar 21, 2004 | 07:30 PM
  #3  
Must be VTEC's Avatar
Thread Starter
 
Joined: Nov 2003
Posts: 51
Likes: 0
From: Newell, Iowa, USA
Default Re: removal of front wheel stud (Must be VTEC)

Got er done!!! Had to be GHETTO!!! But it worked. Thanx
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kvastek
Honda Civic (2001 - 2005)
2
Jan 11, 2022 05:29 AM
fit2slo
Honda Fit
2
Oct 28, 2008 10:56 PM
SinTypeR
Acura Integra
1
Dec 1, 2002 08:32 PM
Tyson
Road Racing / Autocross & Time Attack
22
Jul 13, 2002 03:45 PM




All times are GMT -8. The time now is 06:32 PM.