i kno to some guys on here it's a no brainer so so not really lookin for any smart ace comments. but would i need to change the motor mounts in my 97 civic hatch to put a stock ls in or could i just use the da's mounts?


Modified by 97civhatchy at 10:31 AM 5/25/2008

 

drops right in

 

SWEET bro thanks alot

 

bump

 

You'll need the rear tranny bracket from a 99-00 Si. You can reuse the rest of your stock mounts, but you may need to change out the half of the mount that bolts to the block on the driver side(the one with the 2 thread posts in it).

The rear tranny bracket looks like this:

You can get it here:
http://passwordjdm.com/OEM-EK-....aspx
or at any Honda dealer.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by inspyral &raquo;</TD></TR><TR><TD CLASS="quote">You'll need the rear tranny bracket from a 99-00 Si. You can reuse the rest of your stock mounts, but you may need to change out the half of the mount that bolts to the block on the driver side(the one with the 2 thread posts in it).

The rear tranny bracket looks like this:

You can get it here:
http://passwordjdm.com/OEM-EK-....aspx
or at any Honda dealer.</TD></TR></TABLE>


x2 I know from the fresh build I just did. You will def need this mount. Don't get an ebay knock off though. Get one from a honda dealer, you won't spend that much. Well now that I think about it, it depends on your area. GL

 

thanks to all the replies i got a lil more knowledge now!