There's a couple of things I wanted to know about the ground control kit. I have koni yellows and was thinking of getting the threaded sleeve kit from koni. It comes in two sizes 2.25 ID spring or 2.5 ID spring perches. I know the ground control uses 2.25 ID springs and was wondering if the springs that come with the kit are wider or narrower than oem springs? or Are they identical in diameter?

I should clarify that i want to reuse my h&r race springs with the koni sleeve kit if possible. I have measured oem springs, the ID is 2.4inches with an OD of 3inches. I'm not sure if my method of measurement is correct though.

Thanks for the help


[Modified by ncrx1, 6:43 PM 12/29/2002]

 

Call ground cotnrol directly. They will know fact from hearsay and customize the application you require.