Putting an obd1 engine in an obd2 car
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 468
Likes: 0
From: College Station, TX, USA
Putting an obd1 engine in an obd2 car
What all has to be done? The wiring harness for the engine would be fine with the obd1 computer, but for the electronics in the car those would be different right?
Joined: May 2005
Posts: 1
Likes: 0
Re: Putting an obd1 engine in an obd2 car (JMinSi2000)
all you have to do is get a conversion harness or a obd2 comp for the ecu
other than that depending if the car had v tech or not a couple of wires need to be added
i did it in my car works fine even used the d16y8 harnedd for a b16a3
and also my b18c
other than that depending if the car had v tech or not a couple of wires need to be added
i did it in my car works fine even used the d16y8 harnedd for a b16a3
and also my b18c
Honda-Tech Member
Joined: Oct 2004
Posts: 2,088
Likes: 0
From: All over ATL
Re: Putting an obd1 engine in an obd2 car (JMinSi2000)
I blew my B16A2 in my 2000 Si. I got a B16A and the shop converted it from OBD1 to OBD-2. Not much should be done except that you will need a new ECU to operate the sensors and all. Ask a reputable swap shop.
Thread
Thread Starter
Forum
Replies
Last Post
NOman0608
Honda Civic / Del Sol (1992 - 2000)
3
Jul 26, 2007 10:28 AM
B18Redline
Tech / Misc
2
Feb 16, 2007 07:20 AM
screen_name
Hybrid / Engine Swaps
4
Apr 22, 2006 06:56 PM
