Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

problems with 1st gen b16 in 2g integra

Thread Tools
 
Search this Thread
 
Old Apr 29, 2002 | 11:32 AM
  #1  
djay86's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2002
Posts: 1,615
Likes: 1
Default problems with 1st gen b16 in 2g integra

The following is a problem a friend of mine wanted me to post to see if anyone here could help.. any responses are appreciated..thanks

1991 integra, i/h/e..first gen b16a from jdm1.com

car feels sluggish some times and appears to not even have enough torque to chirp 2nd, car will just lose juice for no reason while driving, like if you stop and try to go it will raise in rpm but then bog out and the motor will cut off
and then you try to start it at first it will turn over for a sec and then die again
after about a min it will start back up though...
Reply
Old Apr 29, 2002 | 12:14 PM
  #2  
Katman's Avatar
Honda-Tech Member
 
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Default Re: problems with 1st gen b16 in 2g integra (djay86)

The following is a problem a friend of mine wanted me to post to see if anyone here could help.. any responses are appreciated..thanks

1991 integra, i/h/e..first gen b16a from jdm1.com

car feels sluggish some times and appears to not even have enough torque to chirp 2nd, car will just lose juice for no reason while driving, like if you stop and try to go it will raise in rpm but then bog out and the motor will cut off
and then you try to start it at first it will turn over for a sec and then die again
after about a min it will start back up though...

ok...lets go through the basics...

Have you checked ignition & cam sprocket timing (TDC)??

Are you getting any check engine lights at all?

Have you done a compression check on the block?

Is your clutch new, fairly new, used, or old?
Reply
Old Apr 29, 2002 | 01:41 PM
  #3  
djay86's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2002
Posts: 1,615
Likes: 1
Default Re: problems with 1st gen b16 in 2g integra (Katman)

engine hasnt been touched since getting it from jdm1.com
Reply
Old Apr 29, 2002 | 01:43 PM
  #4  
Katman's Avatar
Honda-Tech Member
 
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Default Re: problems with 1st gen b16 in 2g integra (djay86)

engine hasnt been touched since getting it from jdm1.com
uhh..maybe you should take the initiative and basically tune your engine. I get the impression you don't work on your own car, for some reason.
Reply
Old Apr 29, 2002 | 06:56 PM
  #5  
riceboy's Avatar
Honda-Tech Member
 
Joined: Aug 2001
Posts: 1,155
Likes: 0
From: Vail, CO, US
Default Re: problems with 1st gen b16 in 2g integra (Katman)

uhh..maybe you should take the initiative and basically tune your engine. I get the impression you don't work on your own car, for some reason.
werd
Reply
Old Apr 29, 2002 | 09:17 PM
  #6  
Gump's Avatar
Honda-Tech Member
iTrader: (1)
 
Joined: Aug 2001
Posts: 5,100
Likes: 0
Default Re: problems with 1st gen b16 in 2g integra (djay86)

do a tune up!

spark plugs
spark plug wires
cap and rotor
oil change
check your timing

and also throw some fuel injection cleaner in, and clean out the intake manifold, it might be really dirty


[Modified by Gump, 10:18 PM 4/29/2002]
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ShreqBoi
Acura Integra
2
Jan 30, 2010 11:43 PM
PhillyB16
Tech / Misc
2
Oct 23, 2007 11:13 AM
djay86
Acura Integra
4
Apr 22, 2002 06:46 PM




All times are GMT -8. The time now is 03:25 AM.