ok, i recently burnt a piston in my old b16 block..so i changed out the block for another b16 block..i put everything back together and trid to start the car, well it starts and runs, but it pours out oil from the pass side rear between the block and the head....any guesses on what it could be??
i did torque head bolts to spec and everything seems to be hooked up correctly....let me know what you guys think...

 

ummm...head gasket?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg6T &raquo;</TD></TR><TR><TD CLASS="quote">ummm...head gasket?</TD></TR></TABLE>

Did you remove all of the old gasket material from the bottom of the head and the top of the block?

 

try re-torquing the head

 

found problem...head gasket on backwards....&lt;--idiot.....thanks everyone