porting intake manifold
06-11-2007, 04:26 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Calgary, Alberta, Canada
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
porting intake manifold
i am swaping my motor and was told to port and polish my intake manifold. what is the best way of doing so. And how much will it make my engine perform better?
06-11-2007, 04:42 PM
#3
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Calgary, Alberta, Canada
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Re: porting intake manifold (NJIN BUILDR)
Its the B-18A1. from a 91 RS. my buddy drove it through a big puddly and sucked up water, then blew a piston out the bottom. so i have another motor head and block, so i am in the middle of yanking the old motor out.
06-12-2007, 05:51 AM
#5
Honda-Tech Member
Join Date: Sep 2005
Location: Md, USA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: porting intake manifold (NJIN BUILDR)
Thread
Thread Starter
Forum
Replies
Last Post
miguey310
Honda CRX / EF Civic (1988 - 1991)
1
06-19-2010 09:04 PM
