PCV on b20 vtec
Thread Starter
* B A N N E D *
Joined: Aug 2003
Posts: 2,360
Likes: 0
From: SD, ca, us
PCV on b20 vtec
the b20's dont have it behind the block. it has it on the valve cover.. im using a 99 SI head.. what do i do?
tap a hole in the valve cover?
for damm sure i dont ahve to drill in the back of the block
tap a hole in the valve cover?
for damm sure i dont ahve to drill in the back of the block
Joined: Sep 2002
Posts: 404
Likes: 0
From: Spfld, Mo, US
Re: PCV on b20 vtec (ShowTymers619)
yes, drill and tap a 1/8" hole in the back of the block. then drill a hole in the top of a universal catch can for the PCV and run a line from the PCV to the mani. Run a line from the fitting you put in the back of the block to one of the fittings in the top/side of the can. Drain can once every few weeks.
Thread
Thread Starter
Forum
Replies
Last Post
DrGrEeNtHuMb
All Motor / Naturally Aspirated
3
Jul 30, 2009 04:30 AM
