Ordering parts... Need help!
Thread Starter
Mustang Sally
Joined: Jan 2002
Posts: 6,092
Likes: 0
From: Midwest
Ordering parts... Need help!
Down the road, I'm going to resleeve my B18C1 to a 2.0 or 2.1L, I was wondering if people normally use the same head when they do this? Do they just port and polish? Also, if I do this... I'll be able to use a jrsc for a b18c1 correct? Just need to be sure... Thanks guys!
Honda-Tech Member
Joined: Apr 2001
Posts: 3,199
Likes: 0
From: South Jersey, USA
Re: Ordering parts... Need help! (Saliva)
resleeving and changing the bore, won't increase the displacement that much
because of the stroke of the motor.
and yes you can use a JRSC on the b18c1 head. If its for the bseries.
because of the stroke of the motor.
and yes you can use a JRSC on the b18c1 head. If its for the bseries.
Thread
Thread Starter
Forum
Replies
Last Post
HondaTom87
Forced Induction
17
Apr 7, 2014 02:32 PM