I can't find my #1 main cap and the machine shop needs all 5 for sleeving. I could either buy a new bare block with mains, or machine a new #1 main cap to use. Which would you guys think would be less cost efficiant? Are there any other options for me? Thanx

 

Get one off of a used blown motor and have your block alignhoned.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostn420 &raquo;</TD></TR><TR><TD CLASS="quote">Get one off of a used blown motor and have your block alignhoned.</TD></TR></TABLE>
best idea. theres tons of people on here that throw rods etc that may want to help you out.

 

That was what I wanted to do, but are you guys sure the machining alone won't be more than just buying a bare block with mains? If align honing it will be less, then I'll definetly just do that. Thanx fellas.

 

line hone is max 200$

 

Yeah, I think I'll do that. Thanx a lot guys. And if you guys have any lying around, feel free to PM me.


Modified by guymosiris at 8:31 PM 5/25/2004

 

i have it