Older throttlebody on a D16Y8
Thread Starter
Member
Joined: Aug 2001
Posts: 1,119
Likes: 0
From: Dust Storm Central, AZ
Older throttlebody on a D16Y8
I found this over in the classifieds section, and I am thinking about bidding, but I want to know if it is possible first
Now I have a 1998 ex coupe, with a D16Y8 engine, would i still be able to use this throttlebody?
Thanks for your help everyone
Check out the link, it was on a 93 Civic EX for about 2000 miles and is in perfect shape. should work on 92-95 Civics and all SOHC Del Sols. Also should work on 88-91 Civics and CRXs with a bit of a mod because of the MAP sensor mounting(I think). http://cgi.ebay.com/ebaymotors/ws/eB...tem=1819606110
Thanks for your help everyone
Thread Starter
Member
Joined: Aug 2001
Posts: 1,119
Likes: 0
From: Dust Storm Central, AZ
Re: Older throttlebody on a D16Y8 (Spade)
Because I never see how much people are selling the integra throttleboy's for, and i thought this would be a good piece that I could use that not many people would notice on an otherwise stock looking engine, plus the price seems good.
Honda-Tech Member
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Re: Older throttlebody on a D16Y8 (inigo9910)
I found this over in the classifieds section, and I am thinking about bidding, but I want to know if it is possible first
Check out the link, it was on a 93 Civic EX for about 2000 miles and is in perfect shape. should work on 92-95 Civics and all SOHC Del Sols. Also should work on 88-91 Civics and CRXs with a bit of a mod because of the MAP sensor mounting(I think). http://cgi.ebay.com/ebaymotors/ws/eB...tem=1819606110
Now I have a 1998 ex coupe, with a D16Y8 engine, would i still be able to use this throttlebody?
Thanks for your help everyone
Check out the link, it was on a 93 Civic EX for about 2000 miles and is in perfect shape. should work on 92-95 Civics and all SOHC Del Sols. Also should work on 88-91 Civics and CRXs with a bit of a mod because of the MAP sensor mounting(I think). http://cgi.ebay.com/ebaymotors/ws/eB...tem=1819606110
Now I have a 1998 ex coupe, with a D16Y8 engine, would i still be able to use this throttlebody?
Thanks for your help everyone
Honda-Tech Member
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Re: Older throttlebody on a D16Y8 (ion_four)
(Though it's my ad, hehe) The integra TB doesn't match up perfectly does it? I thought you had to fill a gap on the bottom.
New User
Joined: Jul 2001
Posts: 331
Likes: 0
From: Pittsburgh, PA, USA
Re: Older throttlebody on a D16Y8 (ion_four)
(Though it's my ad, hehe) The integra TB doesn't match up perfectly does it? I thought you had to fill a gap on the bottom.
the problem was the throttle body wasn't clean
Trending Topics
Thread Starter
Member
Joined: Aug 2001
Posts: 1,119
Likes: 0
From: Dust Storm Central, AZ
Re: Older throttlebody on a D16Y8 (ion_four)
heh, thanks for your help on this guys, with the JG going from a 66m to a 62m taper, my small knowledge of fluid dynamics says this might be better than just 62m (type-r) straight though. Anywho, i will keep an eye on the auction and make a decision closer to the end. Again, thanks for all your knowledge.
[Modified by inigo9910, 11:57 PM 4/8/2002]
[Modified by inigo9910, 11:57 PM 4/8/2002]
Honda-Tech Member
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Re: Older throttlebody on a D16Y8 (ion_four)
So, any B-series TB will bolt right up to a D series manifold with no mods? Well,...even then it still doesn't say "JG" on it 
Honda-Tech Member
Joined: Mar 2002
Posts: 2,178
Likes: 1
From: Portland, OR
Re: Older throttlebody on a D16Y8 (RyanR)
That's what I thought too. Then my JG Pro Series head made my engine blow up.
Thread
Thread Starter
Forum
Replies
Last Post
iwanttogofast
Honda Civic / Del Sol (1992 - 2000)
1
Feb 16, 2007 03:25 PM
