Does any one know if its possible to put oil squirters on a ls bottom end.

Thanks

Danny

 

yes, but dont need 'em.
if you get your block sleeved, then you cant have 'em.

 

i have oil squirters for sale..make me an offer.

 

the block is stock with some mods. i have them from my b16.

any web sites show u how and were to put them.

 

Right Here:

http://www.c-speedracing.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 10K2HVN &raquo;</TD></TR><TR><TD CLASS="quote">yes, but dont need 'em.
if you get your block sleeved, then you cant have 'em.</TD></TR></TABLE>

BS! I have a Golden Eagle sleeved b20 block that we've fit oil squirters in.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jg &raquo;</TD></TR><TR><TD CLASS="quote">

BS! I have a Golden Eagle sleeved b20 block that we've fit oil squirters in. </TD></TR></TABLE>
Good for you.
...i was thinking about saying some sleeves require you to take them out and some dont, but i didnt feel like typing all of that and wanted to keep it short, because most people who use sleeves usually use forged pistons where oil squirters are not Needed.

 

u dont need them at all when running forged pists. dont waste your time.

 

Thanks

what oil suirters are thouse from.
i have b16 will they work?

 

yes you can but it is probbly cheaper to buy a set of eagle rods for the ls and you will be good

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by isp built &raquo;</TD></TR><TR><TD CLASS="quote">yes you can but it is probbly cheaper to buy a set of eagle rods for the ls and you will be good </TD></TR></TABLE>
what would you need rods for?

 

im going to be running probe rods and R pistons...I should use them i think

 

run stock rods and forged pistons, thatll be much better

 

can i use my first gen b16 sqiurters for the job.

 

Will I be able to keep my GS-R oil squirters in my engine if I decide to go with a sleeved GE setup for more boost?

Thanks,
Nick

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nikolai &raquo;</TD></TR><TR><TD CLASS="quote">Will I be able to keep my GS-R oil squirters in my engine if I decide to go with a sleeved GE setup for more boost?

Thanks,
Nick</TD></TR></TABLE>
most likely

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tec1 &raquo;</TD></TR><TR><TD CLASS="quote">can i use my first gen b16 sqiurters for the job.</TD></TR></TABLE>

aint got em'