not sure if this is the right forum or not. wondering what was my best option for getting my car to run better. it's a 90 integra (obd0). i've got a 94 b18c1 w/ itr pistons/rods, and a complete itr head. sittin close to 11.1:1 compression. right now i'm using a stock b16 pr3 ecu. should i just get the pr3 chipped or should i convert to obd1, hondata, or what? i do have plans of building the motor further if that makes a difference. thanks.

 

ttt

 

Convert to obd1, and get hondata...thats your best bet!

 

You can have your PR3 socketed and use Turbo Edit. I have not dealt much with it but, if you don't want to convert to obd1 it may be your only(inexpensive) choice. If you are considering the obd1 conversion I would recommend Uberdata over Hondata anyday. Yes, you can use them for tuning your N/A car as well.

Phil

 

have u converted to obd1? i've always heard horror stories of people getting the conversion harness all f*cked up and had to totally rewire everything. if so who did u get ur conversion harness through? boomslang?

 

http://www.jkobdconversionharness.com/ . Blown90hatch on here is the owner of the company and his harnesses are top quality. He gives excellent customer servie and tech support. I converted to OBD1 using his harness and I have recommended him to many others. I will trust no other harness. His design also allows for the simplest wiring of the distributor when doing the conversion.

Phil