O2 Mechanical Simulator Information needed please.
Well it appears as though the Spark Plug Anti Fouler mod works for some people and not for others, aka me. It worked for 2 days then the CEL returned.
I originally had it exactly like this picture,

My boy Mark did this but used only the bored out one and put it back on the wxhaust of his Spec V and never got a CEL. BTW he wasnt running a cat either of course.
I did the same thing he did and the light went away until I drove about 1/4 mile and the light returned.
The O2 sensor is good also.
Since I have 2 of the foulers Im gonna try it 1 more time, Im gonna bore out the other one and do it again since its only a 5 min thing.
Otherwise Im going to do the resistor trick. If anyone has and links or info on which riseistor to use and which wires to solder it too I would greatly appreciate it.
I originally had it exactly like this picture,

My boy Mark did this but used only the bored out one and put it back on the wxhaust of his Spec V and never got a CEL. BTW he wasnt running a cat either of course.
I did the same thing he did and the light went away until I drove about 1/4 mile and the light returned.
The O2 sensor is good also.
Since I have 2 of the foulers Im gonna try it 1 more time, Im gonna bore out the other one and do it again since its only a 5 min thing.
Otherwise Im going to do the resistor trick. If anyone has and links or info on which riseistor to use and which wires to solder it too I would greatly appreciate it.
Thread
Thread Starter
Forum
Replies
Last Post



