got a jdm with no vtec pressure switch, i tryed grounding out the blu/blk wire and re-settin the ecu and still no vtec, and the i tryed puttin the vtec solenoid wire to the + post and it clicked so its works....any ideals on what else to do

 

At the ECU, connect the VTEC pressure switch wire to the VTEC solinoid wire.

 

i just tryed and still vtec is not kickin in

 

just a shot in the dark, is the CEL on?

 

ya the lights on, not sure what code it is yet workin this week, on monday goin to the shop

 

If ya got any other things to try it would help lots

 

Check the light yourself.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gibsanez &raquo;</TD></TR><TR><TD CLASS="quote">Check the light yourself.</TD></TR></TABLE>

yeah, exactly...

 

... 7 fast blinks pause then 2 short
7=Throttle Position (TP sensor)
2=O2B - Oxygen sensor #2
right?

 

oh...reading wrong i guess or would it be code 72 cylinder no.2 misfire????

 

nah i think you had it right the first time....

 

ya i was hopein so, but checked plugs anyway, looked all good working, unpluged the injecton when car was running and it did the same as the other cyinders sounds like it was goin to die...how would i go about fixing the throttle position sensor?? or would that be comin on because of the 02? the car starts fine then about 10 seconds after it idles up a little and thats when the cel comes on, it idles up cuz its tryin to get more to the sensor right?