NGK BkR6E-11 Spark Plug Gap, what should it be at?
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 3,712
Likes: 0
From: https://t.me/pump_upp
NGK BkR6E-11 Spark Plug Gap, what should it be at?
I checked a couple places, and haven't found a single right answer. I have a B16a1 (Not original engine in my CRX), and I just got NGK BKR6E-11 Non-Platinum plugs. I want to check the gapping on them and make sure they're right. I've heard .052, .051, .033... Which is it?
jB
jB
B*a*n*n*e*d
Joined: Mar 2002
Posts: 7,765
Likes: 1
Re: NGK BkR6E-11 Spark Plug Gap, what should it be at? (PeloTudo)
Anything over 0.044 on the stock ignition is too big.
I like 0.038, it will give you both good low and hi rpm performance.
[Modified by Rocket, 10:18 PM 5/1/2002]
I like 0.038, it will give you both good low and hi rpm performance.
[Modified by Rocket, 10:18 PM 5/1/2002]
Junior Member
Joined: Jan 2001
Posts: 870
Likes: 0
From: Fairfax, VA, USA
Re: NGK BkR6E-11 Spark Plug Gap, what should it be at? (Rocket)
Anything over 0.44 on the stock ignition is too big.
I like 0.38, it will give you both good low and hi rpm performance.
I like 0.38, it will give you both good low and hi rpm performance.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
