Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

Negative Tire Setback....Problems?

Old Oct 17, 2003 | 01:39 PM
  #1  
MrIllegalX's Avatar
Thread Starter
 
Joined: Mar 2003
Posts: 500
Likes: 0
From: Tucson, AZ
Default Negative Tire Setback....Problems?

My passanger side tire has a .54" setback due to hitting a curb.
The setback is caused by the frame being offline. I can't pull the frame anymore than it's already been pulled.


Has anyone else had a setback, and is there a way to make it any better?
And also, is there a reason that my camber on my right side is less than my left?
Here's my info from a 4-wheel alignment awhile back.


Reply
Old Oct 17, 2003 | 02:43 PM
  #2  
pro1342's Avatar
 
Joined: Aug 2003
Posts: 415
Likes: 0
From: Houston, TX, USA
Default

The specs indicate your car will pull to the right. You might need a knuckle or LCA......
Reply
Old Oct 18, 2003 | 09:23 AM
  #3  
MrIllegalX's Avatar
Thread Starter
 
Joined: Mar 2003
Posts: 500
Likes: 0
From: Tucson, AZ
Default

LCA was replaced. knuckle could be a possibilty.

Car does pull to the right, but after the 4-wheel alignment it's not as bad as it used to be. Pulling isn't my major concern. It's how many turns it takes to go left v. how many turns it takes to go right.
Reply
Old Oct 18, 2003 | 11:45 AM
  #4  
pro1342's Avatar
 
Joined: Aug 2003
Posts: 415
Likes: 0
From: Houston, TX, USA
Default

The rear beam/crossmember could be bent, too.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
VTECROAR96typeR
Suspension & Brakes
4
Apr 4, 2010 10:11 AM
yOnKiNaToR
Honda Prelude
30
Oct 16, 2008 06:39 PM
agiorlando
Acura Integra
1
Sep 14, 2008 04:44 PM
EGBuddy
Wheel and Tire
4
Apr 22, 2006 11:19 AM
rody084
Tech / Misc
4
Apr 16, 2003 01:30 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 06:39 AM.